Sealers, Hardeners And Epoxy
Sealers and curing compounds; water repellants are all offered at Murray Decorative Concrete Supply. The following is a product sampling:
EPOXY 400
Click here for more details on EPOXY 400
TK Bright Glaze is especially formulated for use on colored and stamped concrete. It is a 100 methacryate polymer blended with aromatic solvents with no filler added. Gives extra protection from freeze-thaw cycles, deicing salts and chemical erosion. it is a clear coating that does not yellow. High Gloss.
TK-290 TRI-SILOXANE is a low viscosity oligomeric organosiloxane masonry water repellent, which achieves maximum hydrolysis under the influence of atmosphere moisture and polymerizes to a polysiloxane, which is tack free and hydrophobic in nature. Through this reaction, the siloxane groups are chemically bonded to the concrete, which eliminates the ever present moisture that had previously engulfed the cementitious surface, thus eliminating spalling, freeze damage, and rebar corrosion.
Therefore TK -290 TRISILOXANE is chemically bonded within the substrate, not just physically bonded like other surface penetrating sealers. This formulation is ready-to-use, colorless, breathable, non-staining, non-yellowing, deep penetrating, concrete and masonry water repellent.
TK-290 Final Seal is an aromatic solvent version of TK-290 Tri-siloxane. It is ready-to-use, colorless, breathable, non-staining, non-yellowing and deep penetrating. Because of its formulation, TK-290 Final Seal may be applied to concrete that had previously been applied with a cure and seal.
ColorJuice Sprayable Water-Based Sealer is a Low-VOC, fast drying water-based sealer designed to protect and beautify decorative concrete. It contains complex additives not found in other sealers. ColorJuice™ Sealer is designed for use with Color Juice™ colorant, but may be used to seal concrete with no color or with other compatible color products in both exterior and interior concrete use. Helps resist oil and chemical stains. ColorSeal can be used on interior or exterior masonry and concrete-type surfaces. Use on colored or uncolored, stamped or exposed aggregate concrete, porous brick, natural and manufactured stone, stucco, slate, unglazed tile and flagstone.
CSI Solvent Sealer 18 is a high quality, breathable, solvent-based 100% acrylic sealer with a semi-gloss finish. It can be sprayed or rolled. This sealer protects surfaces against dusting, staining and dirt with a non-yellowing finish.
|